|
Other Range of Transfer Switches ZTS ZTSD ZTGD ZTX
Designed for standard applications, the ZTG Series builds on ZTS technology while providing a pre-engineered project solution.
The series uses the MX100 microprocessor control system, which includes as standard many of the most common features specified on a transfer switch. It also provides an intuitive user interface, communications capability and self-diagnostics.
The ZTG is available in a full range of ampere, voltage and pole configurations, along with many commonly requested options and enclosure types.
Electrical Ratings
- Ratings 40 to 3000 amperes
- 2, 3 or 4 poles
- Double-throw, mechanically interlocked contactor mechanism
- Available in ZTG (standard) or ZTGD (delayed transition) models
- Suitable for emergency and standby applications
- UL 1008 listed at 480 VAC
- CSA certified at 600 VAC
- IEC 947-6-1 listed at 480 VAC
- Open type, NEMA 1, 3R, 4, 4X and 12
Performance Features
- Close differential under-voltage sensing of the normal source
- Voltage and frequency sensing of the emergency source
- Test switch (fast test/load/no load) to simulate normal source failure?2014automatically bypassed should the emergency source fail
Design and Construction Features
- Double-throw, interlocked operation
- Electrically operated, mechanically held by a simple, over-center mechanism
- Segmented silver tungsten alloy contacts with separate arcing contacts on 600 amps and above
- Arc quenching grids, enclosed arc chambers and wide contact air gap for superior source-to-source isolation on all units
- Control circuit disconnect plug and drive inhibit switch for safe maintenance
- Components accessible for inspection and maintenance without removal of the switch or power conductors
- Mechanical indicator and contact chamber cover designed for inspection, safety and position designation
|
